Dual ESC 6.6 Compatible with VESC® Tool
The Dual Vesc® 6.6 Based ESC is based upon the Hardware V6.6 VESC® Open Source Project, and compatible with VESC® Software.
The Dual Vesc® 6.6 is a highly modifiable electronic speed controller designed for DIY Electric Skateboards conversions in mind.
Capable of BLDC and FOC mode.
Customizable settings with VESC® Tool.
Integrated Power Switch.
Hall Sensor and Comm ports use a 1.5mm pitch connector rather than the 2.0mm connectors we use on our motors and remotes. You will have to create an adapter for these connectors while we wait for our adapters to come in.
◆ Hardware: V6.6
◆ Integrated Power Switch
◆ PCB: 6 layers, size: 100*100*25mm
◆ Current: 2 x 100a
◆ Voltage: 8V-60V (Cells: 3s-12s)
◆ BEC: 5V@1.5A / 3.3v@1A
◆ Motor control interface: PPM signal (RC servo), analog, UART, I2C,
USB or CAN‐bus.
◆ Cutoff Voltage: Programmable
◆ BLDC ESC V6 Size: 100*100*25mm (Estimated)
◆ Programming card: No
◆ Reverse: Yes
◆ Port Pitch: 1.5mm
What's In the Box?
(1) Dual ESC 6.6
(1) PPM Cable
(1) Power Button
*VESC is a registered trademark owned by Benjamin Vedder.
VESC Hardware by Benjamin Vedder is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
For more Information and to download the PC software please visit (http://vedder.se/2015/01/vesc-open-source-es-c/) .