Endurance Electric Skateboard
Build Version: V1.5
Top Speed: 30+mph (Choose AT MAX Speed for 35+mph)
Range: Range depends on rider size, riding style, and terrain type. See Below :)
Our rider weighing 185lbs, has been able to achieve 50+ miles on AT wheels, riding moderately with minimal elevation change. (expect a 20-30% range decrease for the 4WD version)
Though we have not been physically able to drain the battery in a single ride before having to give up on 97mm wheels, we estimate an 70+mile range. Your feet might fall off before you drain your battery.
Deck Dimensions: 39.75in*10in
Wheel Base: 39in
Total Board Weight: 35lbs
Max Load: Tested at 260lbs
The Endurance Features A Top Notch Parts List:
- Forged Carbon Fiber Deck
- 1450Wh 12s8p Molicel P42A Battery Pack
- MakerX DV6 Pro
- Dual 3250W 6368 190kv Motors
- BoardBumpers Wheel Pulleys
- VX4 Remote
- DKP Trucks
- Upgraded RipTide Bushings - 96A
- Custom Laser Cut Jessup Grip Tape
- 5A Fast Charger
175mm AT Wheels - 15T/66T - 30mph (MAX : 15T/58T - 35mph)
150mm AT Wheels - 15T/58T - 32mph
97mm Street Wheels - 15T/36T - 35mph
Assembled and Supported in the USA!
No more waiting weeks to get a board, no more pulling teeth to get a reply from over seas. Every Endurance Electric Skateboard is assembled and supported right here in the US. Have a question? Get a response. Need a replacement part? Get it shipped out same/next day. Need to get your board serviced? Get it repaired quickly!
The Endurance is designed with DIYers in mind. Every Endurance is built with standardized connectors, compatible with motor mounts and wheel pulleys from other companies, and is based around an open source VESC based ESC.
The design of the Endurance allows the rider to easily upgrade nearly any part. We've designed this board using community standards so finding compatible parts is a breeze. Featuring a combined battery and ESC enclosure, it won't be difficult fitting an upgraded battery pack in the future. Easily swap your motors, your battery, your ESC and use nearly any Esk8 brand. You aren't locked into any kind of proprietary branded ecosystem.
The MakerX DV6 Pro has been tuned to peak performance to match the design of the Endurance. Although the MakerX DV6 Pro is highly tunable, any changes to the current settings may void the ESC's warranty so please contact us prior to any setting changes as we can help you through the process to ensure safe operation.
Though we do ship our boards with gaskets and make every effort to seal up areas of ingress, we do not have an official water resistance rating. Please keep your board dry.
All boards come with a 100 day warranty against manufacturing defects. If something happens to your board, we'd be happy to ship you replacement items. You are also welcome to ship/bring your board in and we will perform the needed repair.
Free Tune Ups
Ship or bring in your board to us anytime and we'll give you a free check up and ensure your board is operating as intended.
What's In The Box?
- Endurance Electric Skateboard
- 5A Board Charger
- VX4 Remote
- VX4 Remote Charger
- Skate Tool
- Accessory Bag
- Spare Screw Set
Build Version History:
The Heatsink and Motor Mounts are now shipping in a raw silver finish.
The MaxerX DV6 Pro has now been replaced with the new MakerX DV6s. The heatsink has been updated to match the new hole pattern of the DV6s including a fresh redesign.
Heights and Hardness of RipTide Bushings have been optimized for an even more stable ride
Boards now built with in-house CNCed Motor Mounts
Boards now built with in-house CNCed Heat Sinks
Boards now built with PCB style battery packs for improved reliability
Boards now built with MakerX DV6 Pro